aa6e48-ee

Technical data 

Features

1. Precision-designed high-grade direct drive planetary gear system

2. Locking collar to keep the auger from swinging

3. Reversible drive

4. Continuous spiral cutting bit designed to avoid clogging

5. Hoses and flat-faced couplers included

6. 3 Drilling - 6", 12", 14" Bits

Product Description

•  Built to handle tough jobs while being reasonably priced, this auger is a great value to anyone with frequent hole drilling needs.
• A universal mount plate, hoses, flat-faced couplers, and auger bit are included. All you need to get drilling holes is a compatible skid steer.

 Trencher Comes With Hydrualic Hoses

Features:

1. Can move manually or with hydraulic side-shift to get close to buildings.
2. Use Single Standard chains for loose, damp soil.
3. Use Double Standard chains for harder, drier soil; they have double the teeth.
4. Use Half Rock & Frost chains for tough conditions like frozen or rocky ground.
5. Comes with trench cleaner arm, hoses, and flat face.
6. Includes three hydraulic hoses: two ½" hoses for In and Out, plus a case drain line to release motor pressure. Also includes flat-faced couplers.

Skid Steer Broom Sweeper attachment for sale

Specification

Feature

1. Floating linkage design keeps the broom adaptable to the road surface properly and consistently, reducing the bristles wearing.

2. Adjustable protection metal stand.

3. Hydraulic hoses included.

4. The case drain line (the third hose) provides an option to release motor case pressure, alternatively extending the motor's lifetime.

5. Bi-directional rotation bristles.

6. A motor protection guard frame was installed.

Click here for more about our skid steer breaker

Technical Details

Solutions to common problems

The hammer is not working after the installation

1. Improper bushing replacement. Refit the inner bushing. Make sure to use the original.
2. Quick couplers are installed wrong. Check connectors and replace them as needed.
3. Supply hoses have been reversed. The pressure line from the pump must be connected to the port marked IN. The return line connects to the port marked OUT.
4. Nitrogen pressure is too high, Release nitrogen and recharge as needed. 

Why does the hydraulic hammer suddenly stop hammering?

• The backhead pressure is too high. Release nitrogen and recharge as specified.
• The backhead is filled with oil. Disassemble the back head and replace the seal.
• The control valve is stuck. Disassemble and clean the valve, and replace the worn valve.
• Oil flow is not sufficient. Repair the pump, and adjust the hammer valve.

Features

Product Overview

Designed for use with 45-100HP medium to large skid steer loaders, the AGT-SSHH-750A hydraulic breaker hammer gets hard jobs done with ease. 

With a 3’’ (75mm) diameter moil point chisel, this hammer is perfect for medium to large jobs including construction, demolition, excavating, and landscaping. 

An impact rate of 500-800 BPM combined with 223-240 PSI working flow pressure makes this a versatile and efficient breaking hammer for breaking driveways, demolishing concrete structures, and digging holes.

Includes

Buy the blade: Click Here

Gear oil: 80W-90 gear lubricant

Features

Description

Applications:

• Mowing steep banks
• Mowing around ponds
• Cutting back brush on roadways and trails
• Reaching over fences and guardrails

Specifications

• Apply to 3-8 tons excavator Fit Caterpillar: 306, 307, 308
• cutting capacity: 6"
• Overall Size: 54'' x 16.5'' x 18''
• Cutting Width: 54''
• Cutting Height: 1.6''
• Quantity of Blades: 2
• Flow Rating: 16-21 GPM
• Max Pressure: 3050 psi
• Weight: 540lbs

Packing Information

• One unit per plywood case
• Packing Dimensions: 57" x 17" x 18.5"

1. Precision-designed high-grade direct drive planetary gear system.
2. Locking collar to keep the auger from swinging.
3. Reversible drive.
4. Continuous spiral cutting bit designed to avoid clogging.
5. Hoses and flat-faced couplers included.

Product Description

Safety Tips for Using:

• Making sure you're familiar with how to operate a skid steer with an auger attachment
• Never operating the skid steer with auger attachments when you're under the influence of alcohol.
• Ensuring all guards and shields are in place, and are in good condition before working.
• Making sure the work site is clear of obstacles and people.
• Never operate the skid steer from any place other than the driver’s seat.
• Never attempt to fix or alter any component of the auger while it’s in use.

This heavy-duty skid steer brush cutter is built to tackle tough vegetation, cutting bushes and branches with ease thanks to its 5"–12" cut capacity and 4 bi-directional, solid AR400 steel blades. Its reinforced 1/4" deck, 3/8" side plates, and 1/2" double round blade holder ensure durability and reliable performance for demanding jobs.

Requires a case drain

Parts Document

Technical Data:

• Operation Weight: 0.716 Ton
• Gear Oil: 80W-90 Gear Lubricant

Safety Tips:

1. Choose your season. The best time to use a brush cutter is in late fall or early winter when vegetation is reduced and visibility is improved.
2. Wait for a dry day. For best performance and safety, cut during dry conditions and during daylight.
3. Inspect the site. Mark or remove any hidden obstacles, including rocks. Gauge the thickness of any saplings you may have to cut in relation to the capabilities of the machine (as described in the manual) and the blade you’re using.
4. Clear the area. Keep people and pets away from the area you intend to clear. If your brush cutter has a deflector, use it.

For blade click here 

Gear oil: 80W-90 gear lubricant

Features

1. Skid Steer flail mower has a hydraulic motor system with a drive belt to the flail shaft.

2. Adjustable skid shoes to prevent damage to the cutting surface.

3. Double spiral driveshaft.

4. Front guard: cantilever galvanized slats.

5. Check valve, oil-in, oil-out, and case drain.

6. Self-leveling kit.

7. Flat-faced NPT thread couplers included.

Product Description

In Skid Steer Flail Mower is a must-own skid steer attachment to work efficiently to mow brush, grass, and vegetation up to 2".

• Perfect for maintaining your fields, orchards, vineyards, and other farm properties.
• A sturdy universal mount and steel frame ensure the machine can handle the job when exposed to rougher applications.
• If you have a special Skid Steer Attachment inquiry or are unsure if your machine is compatible with a particular attachment, contact us at AGT Industrial!

Specifications

Packaging

• Dimension: 79" x 33" x 24"
• Shipping weight: 826.73 lbs

Note: 

Our skid steer tiller is suitable for the machine with working pressure between 32-60 Mpa, Flow is 23 GPM

Specification

Powder coated finish

Features

1. Double edge replaceable tines.
2. Bi-directional rotation (The blade is unidirectional)  can dig hard into the ground.
3. The rotary tiller moves evenly mounted to the skid steer loader.
4.  With high efficiency, save manpower and resources.
5. Loose and flat rugged materials on the ranch bed.
6. Use the big-torque hydraulic motor to drive the rotary tiller. 
7. Include hydrulic hoses and a universal mount

Description

Skid Steer Flail mower great for lot clearing, tall grass, brush and shrubs
Skid Steer 72" Rototiller Tiller Attachment New
It is brand new, never used. See pictures for details

Click here to see more our skid steer brush cutter

The Skid Steer Concrete Breaker, featuring a 2.7" chisel, is perfect for tasks that require both light and medium effort, making it popular among demolishers, landscapers, and those working on construction sites.

Recommended nitrogen pressure: 210 PSI. The tank is empty, you need to rent a nitrogen tank or add nitrogen yourself.

Tutorial Video

Specific Data:

• Operating weight	550 lbs
  Working pressure	210 psi
  Working flow	9.5-16 GPM (36-60 L/min)
  Impact rate	500-900 BPM
  Impact energy	600 joule
  Chisel diameter	2.7" (68mm)
  Hydraulic hose diameter	1/2"
  Ear spacing - inside	10.2" (258mm)
  Ear spacing - outside	11.4" (290mm)
  Pin center to center	8.8" (224mm)
  Package Dimensions	50.39" × 24.01" × 23.62"
  Shipping weight	870.82 lbs

Click here for more cheap walk behind trencher

6.5HP RATO engine

Specification

Description

The TCR650 is the compact model in the AGT trenching lineup. It wields a 6.5HP RATO engine. It has an easy-to-pull starting mechanism and emergency stop just in case. It has an adjustable cutting angle controlled by a notched spring-loaded adjusting mechanism. We also carry a full stock of the chain/blades required for this. and it does come with one fitted initially  

Click here for more walk-behind roller compactor

Description:

AGT 6.5HP Single Drum Vibratory Rollers for Road Asphalt Compactor

1. Gross Weight: 688 lbs / 312 kg

2. HP: 6.5 HP

3. Requires less pulling force, for easier and quicker starting.

4. Vibratory Rollers are used in asphalt compaction, asphalt resurfacing, and soil compaction in general as crushed stone, sand, gravel, bases, and sub-bases. It is highly resistant equipment and has low maintenance costs.

5. An ideal solution for contractors, municipalities, and repair agencies for asphalt patching jobs.

Detail Pictures:

4 inch Skid Steer Wood Chippers for sale

Features

• Hydraulically operated
• Chips 4-inch diameter timber 
• Rotating debris chute
• Adjustable material hopper

Product Description

Designed to be powerful and solid, the AGT Industrial Skid Steer Wood Chipper is ready to chip tough branches thanks to its high torque cycloidal motor and angled high-efficiency rotor.

Offering incredible performance for the cost, this wood chipper with a universal skid steer mount is capable of making quick work of branches up to 4” in diameter. Cleaning up fallen branches and wood is a breeze with the SSBX42S skid steer wood chipper.

Technical Details

Click here for more walk-behind roller compactor

Description:

AGT 13.5 HP Double Drums Vibratory Rollers for Road Asphalt Compactor

1. Gross Weight: 1389 lbs / 630 kg

2. HP: 13.5 HP

3. Operating radius is small, can work in a small area.

4. Surafce spray, beautiful appearance, rust corrosion.

5. Using international brandname hydraulic drive unit, variable speed, reversing convenient.

6. Vibratory Rollers are used in asphalt compaction, asphalt resurfacing, and soil compaction in general as crushed stone, sand, gravel, bases and sub-bases. 

7. An ideal solution for contractors, municipalities and repair agencies for asphalt patching jobs.

Snow plow is ideal for sidewalks or skinny driveways.

Our snow plow has hydraulic cylinder(picture five),hydraulic drive angle.

Our hydraulic snow plow is suitable for any brands of machine with 2600 psi pressure

Specifications

Features

• Spring shock absorbers

Agrotk 84" skid steer snow plow is equipped with a pair of heavy duty spring shocks. These spring shocks absorb the impact and extend the life of your blade while maximizing efficiency. Great for clearing dirt on your job site or pushing snow off of your farm and driveway.

• Universal skid steer connection

 This 4-way blade/plow is designed to connect to almost all models of skid-steer, including Bobcat, John Deere, Gehl, Case, New Holland and more.

• A uniquely engineered A-frame

A uniquely engineered A-frame allows for directional angle operations that can move 30° left or right so you can direct snow or debris away from paths and driveways or into piles.

• Stainless Steel Mold Board-- resists rust due to scratches and wear
• Powered by a forceful hydraulic cylinder that operates under 2600 PSI of pressure for smooth, effective working action
• Two industrial strength trip springs--absorb pressure and pushback from snow
• Universal skid steer quick mount
• Hydraulic hose included

Manual

Click here:  Manual

Skid Steer  Broom Sweeper Attachment for sale.

Part Diagram:  Click Here

Features

• reduces downtime
• Poly/wire mix bristles
• Hydraulic hoses included
• The case drain line (the third hose) provides an option to release motor case pressure, alternatively, extend motor lifetime.
• Bi-directional rotation bristles
• Replaceable cutting edge
• Motor protection guard

Specification

Working width: 72"

Number of wafers: 41

Wafer diameter: 22"

Core diameter: 6.5”

Bucket capacity: 0.6 cubic yard

Power required: 45-75 HP

Hydraulic flow: Min. 10 GPM to Max 25 GPM

Packing Information:

Dimensions: 88.2'' x 56.7'' x27.6''

Shipping weight:1092 lbs

Buy disc mulcher teeth: Click Here

Click here for our skid steer mulcher for sale

Owner's Manual

Owner's Manual : Click Here

Part Diagram :  Click Here

Features

1. Built to withstand the toughest conditions with many type of land reclamation, this powerful machine regains disc speed quickly, offering maximum productivity and efficiency.

2. This disc size is not only extremely effective at the Cut and Feed Technique but it also mulches less grass and natural vegetation around the trees you are clearing, making it ideal for reclaiming your pasture land for grazing.

3. About the Disc: The machined steel disc has quad teeth on the top, sides, and bottom, it can maximize their productivity and reduce downtime and maintenance costs.

4. In addition, you will benefit from low operating costs by consuming less fuel compared to other larger attachments.

Descriptions

Technical Data