aa6e48-ee

Click here for more tractor pto shafts

Features:

1. Spline & Round End: Tractor End: 1-3/8" x 6 Spline; Implement End: 1-3/8" x Round End. Constructed in the 6-spline end.

2. Telescope Tube Design: Compressed Length: 39.37" ; Extended Overall Length: 51.5".

3. It has 35HP—53HP Speed, and 460N.m—360N.m torque at 540rpm-1000rpm.It allows two sides of the PTO drive line shaft to spin at different speeds.

4. Quality T4 Pto Shaft: This T4 PTO shaft is a well-forged series4 driveline shaft with CE certification.

5. It consists of a solid 16Mncarburized steel universal joint and Drive Shaft Material 45 # Forged Pieces.

Product Description:

Swivel joint for AGT DM12 Series

Descriptions

• Wash away dirt and grease on your vehicles, machinery, walls and walkways
• Powered by a reliable 6.5HP Powerful PR Pro gasoline engine
•  3 GPM water output at up to 3000 PSI
• 12V DC igniter & diesel fired burner
• 33’ high-pressure hose and spray wand assembly included

Features

• Reinforced, fully welded industrial use structure with a powder-coated steel frame finish can hold its own on any job site and is resistant to rust and corrosion.
• Automotive engine-type rubber cushions were added on the base to reduce vibration and noise while operating as well as reduce wear and tear over time.
• Diesel-fired burner with a stainless steel housing that can heat water to approximately 100℃ in just under 1.5 minutes for more cleaning power.
• All-in-one operation control panel that includes an adjustable thermostat, on/off switch, and easy-to-use water pressure settings.
• Compact design and attached lifting bar for convenient mobility while working, between job sites, and taking in and out of storage.
• 33’ high-pressure hose allows you to work around big vehicles or farm equipment and also covers large floor spaces, driveways, or buildings.

Specifications

12 Inch Bit for Mini Excavator | 12EX-300Adrill

Features:

Wear-resistant material

Easy installation and operation, safe and reliable

Suitable for excavating general clay and handling sand, soil, and gravel

Technical Specification:

Packaged Weight：37.8KG

Packaged Dimensions：645*460*280mm

Enhance your construction capabilities with the AGT Industrial 15" Bucket, designed for mini excavators like the AGT H12 and KAT12. Engineered for reliability and efficiency, it simplifies standard excavation tasks, delivering precision and durability for dynamic job site needs.

This is the toothless bucket for 1 Ton Mini Excavators which you can find here:

AGT-H12

Technical Data:

• High Quality 60Si2Mn steel

Wear-resistant material -Easy installation and operation, safe and reliable -Suitable for excavating general clay and handling sand, soil, and gravel.

Technical Data:

• High Quality 60Si2Mn steel
• Wear-resistant material
• Packaged Weight：31.5kg
• Packaged Dimensions：550*460*280mm

This heavy-duty skid steer brush cutter is built to tackle tough vegetation, cutting bushes and branches with ease thanks to its 5"–12" cut capacity and 4 bi-directional, solid AR400 steel blades. Its reinforced 1/4" deck, 3/8" side plates, and 1/2" double round blade holder ensure durability and reliable performance for demanding jobs.

Requires a case drain

Parts Document

Technical Data:

• Operation Weight: 0.716 Ton
• Gear Oil: 80W-90 Gear Lubricant

Safety Tips:

1. Choose your season. The best time to use a brush cutter is in late fall or early winter when vegetation is reduced and visibility is improved.
2. Wait for a dry day. For best performance and safety, cut during dry conditions and during daylight.
3. Inspect the site. Mark or remove any hidden obstacles, including rocks. Gauge the thickness of any saplings you may have to cut in relation to the capabilities of the machine (as described in the manual) and the blade you’re using.
4. Clear the area. Keep people and pets away from the area you intend to clear. If your brush cutter has a deflector, use it.

Technical Details

Wiring diagram

1. connect to the skid steer.

2. connect the quick plug to the loader, operate the loader one-way control, one positive and one negative, and see which two solenoid controller lights are on.

3. plug the two you find in step two respectively to the large solenoid valve of the machine. The other two randomly find a plug to the small solenoid valve on it.

Features

1. The shear shape is equipped with blades driven by a pair of hydraulic cylinders to finish the shearing action and cut off the tree trunk.

2. Tree Shears are available with two different styles of shear arms. These are the standard arm and extended arm designs.

3. Equipped with a guarded hardline to improve hose protection from abusive elements.

4. The proper tree dia. is 0-15 3/4 in.

5. Tree Shear for skid steer loaders is the ideal tool for general land clearing.

6. Designed for a general land clearing where materials are no more than 14 inches in diameter, Tree Shears feature solid cast shearing arms that deliver 60% stronger performance compared to competing products.

Product Description

• The shear shape equipped blades are driven by a pair of hydraulic cylinders to finish the shearing action and cut off the tree trunk.
• Designed for a general land clearing where materials are no more than 14 inches in diameter.
• Tree Shears feature solid cast shearing arms that deliver 60% stronger performance compared to competing products.
• Tree Shears are available with two different styles of sheer arms. These are the standard arm and extended arm designs and are Equipped with a guarded hardline to improve hose protection from abusive elements

Details

   

2. Designed for a general land clearing where materials are no more than 14 inches in diameter, Tree Shears feature solid cast shearing arms that deliver 60% stronger performance compared to competing products.

   

3. Tree Shears are available with two different styles of sheer arms. These are the standard arm and extended arm designs.

   

This compact excavator, powered by a B&S engine, offers 13.5 horsepower for efficient operation. With a lift capacity of 100 kg and an operation weight of 1 ton, it balances power and maneuverability. It uses ISO 46 anti-wear hydraulic oil for smooth operation and can use 10w-40 or 15w-40 motor oil.

Performance-wise, it digs up to 5.41 feet deep, reaches a height of 7.87 feet, and extends 9.84 feet. It has a minimum rotation radius of 5.26 feet, a 30° max angle of climb, and can load up to 5.48 feet high.

Parameter

Excavators with cabs enhance comfort and safety by providing a closed environment that minimizes noise, dust, and environmental distractions during extended operations. Featuring large windshields and side windows for improved visibility, along with safety features like protective doors and emergency escape windows, they are ideal for complex job sites, from construction and mining to farming and roadwork. Their compact design ensures flexibility and maneuverability in tight spaces.

In Action Video

Technical Data:

• Operation Weight: 1 Ton
• Engine: R420D Gasoline
• Horse Power: 13.5
• Max Angle: 30 Degree

Specific Data:

Working Weight(lbs): 2121 lbs

Bucket capacity(cubic yards): 0.039 cubic yards

Climbing ability(%): 30%

Travel speed low/high speed(mph): 0-1.1

Hydraulic system:

Main pump type/model: gear pump/06
Rated set pressure (psi): 2320 psi
Multi-way valve: 8 joint multi-way valve
Travel hydraulic motor type: BM6-315
Rotary hydraulic motor type: BM2-315

Maximum flow rate of main pump (gallons per minute): 5.7 gpm

Basic Performance Parameters:

Maximum Digging Height(inches): 100.79 inches

Maximum Unloading Height(inches): 70.87 inches

Maximum Digging Depth(inches): 66.65 inches

Max. digging radius(inches): 120.47 inches

Overall Length(inches): 115.16 inches

Overall Height(inches): 95.35 inches

Overall Width(inches): 37.72 inches

Bulldozer Width/Height: 35.71 inches / 15.75 inches

Engine:

Engine Brand: RATO

Engine Model: R420D

Max. power(hp): 13 hp

Max. speed(rpm): 3600

Cylinders: 1

Cooling method: fan cooling

Engine oil change quantity(quarts): 1.16 quarts

Fuel Type: Gasoline

Fuel Grade: 92#

Theoretical fuel consumption(gallons per hour): 0.13-0.32 gph

1. Precision-designed high-grade direct drive planetary gear system.
2. Locking collar to keep the auger from swinging.
3. Reversible drive.
4. Continuous spiral cutting bit designed to avoid clogging.
5. Hoses and flat-faced couplers included.

Product Description

Safety Tips for Using:

• Making sure you're familiar with how to operate a skid steer with an auger attachment
• Never operating the skid steer with auger attachments when you're under the influence of alcohol.
• Ensuring all guards and shields are in place, and are in good condition before working.
• Making sure the work site is clear of obstacles and people.
• Never operate the skid steer from any place other than the driver’s seat.
• Never attempt to fix or alter any component of the auger while it’s in use.

For blade click here 

Gear oil: 80W-90 gear lubricant

Features

1. Skid Steer flail mower has a hydraulic motor system with a drive belt to the flail shaft.

2. Adjustable skid shoes to prevent damage to the cutting surface.

3. Double spiral driveshaft.

4. Front guard: cantilever galvanized slats.

5. Check valve, oil-in, oil-out, and case drain.

6. Self-leveling kit.

7. Flat-faced NPT thread couplers included.

Product Description

In Skid Steer Flail Mower is a must-own skid steer attachment to work efficiently to mow brush, grass, and vegetation up to 2".

• Perfect for maintaining your fields, orchards, vineyards, and other farm properties.
• A sturdy universal mount and steel frame ensure the machine can handle the job when exposed to rougher applications.
• If you have a special Skid Steer Attachment inquiry or are unsure if your machine is compatible with a particular attachment, contact us at AGT Industrial!

Specifications

Packaging

• Dimension: 79" x 33" x 24"
• Shipping weight: 826.73 lbs

Single Acting Hydraulic Pump for H12 and More

This single-stage hydraulic pump is designed for a wide range of applications, boosting performance and productivity. Its efficient and robust design ensures optimal fluid dynamics for various operational needs.

AGT-H12

The QK18K-C stands out in the 1.8-ton excavator class with its powerful Kubota engine, integrated swing boom, and hydraulic thumb for enhanced versatility. Unlike other excavators in its class, this model is equipped with a robust 12 series boom and arm, offering compatibility with a wider range of attachments.

In Action Video

Manual

Technical Data:

• Operation Weight: 1.4 Ton
• Engine: Kubota Engine
• Horse Power: 13.5
• Max Angle: 30 Degree

Specific Data:

Key Features:

• Kubota Engine: Equipped with a reliable and efficient Kubota engine for superior power and fuel efficiency.
• Swing Boom: Provides precise maneuverability and ease of operation in tight spaces.
• Hydraulic Thumb: The included hydraulic thumb adds versatility for gripping and moving materials, perfect for demolition and landscaping tasks.
• 12 Series Boom and Arm: This heavy-duty design is compatible with all of our other attachments, offering maximum flexibility and adaptability for various tasks.